News RSS

A common issue with the Triumph Tiger 1200 (2022-2026) is that the headlight is aimed too high from factory, the second issue is that the headlight level adjuster on many bikes are too stiff to be turned. On investigating the issue, we found that the rubber grommet which holds the adjuster dial in place was simply too tight, not allowing the dial to be turned without significant force. We have designed a replacement grommet which fixes this issue. This article describes how to disassemble the motorcycle and remove the headlight in order to complete the modification. NOTE: CARRY OUT THIS...

Its been a while since we last done any major upgrades to our parts, but we have started shipping all our new and recent charge port covers, battery caps and Kiox bumpers with a carbon effect surface finish! This takes 3D printed parts to the next level in appearance, giving them a sleek finish that you wouldnt even be able to tell came from a 3D printer.

The time has arrived to upgrade and renew our printing machines! A new addition to our fleet of printers, the Bambulab printer is top of its class in print quality and capability. This means that our parts just got better, improved surface finishes and faster printing. what does it take to run a 3D print shop? A fleet of printers and plastic stock, CAD Engineering design skills, basic knowledge of programming, experience of computer aided manufacturing, an understanding of material science and over 10 years experience of building and running 3D printers… let us do the making so you can...

Many have seen the Kiox mounting which Trek bikes come with, mounted on the top tube of the frame just below the stem. We had been thinking that an option like this for other bikes would be great, but how could we achieve this without permanently modding the bike... So we set about working out a solution. Firstly we set about modelling a bracket which would be able to hole the Kiox. The design uses the original shape of the Acid bracket which came on the Cube Stereo Hybrid. Many iterations later we got a perfect fit. The next challenge...

Following multiple requests on social media, we have decided to produce a new product, pivot plugs for the Cube Stereo Hybrid eBikes. Owners out there feel that the frame pivot bolts look somewhat unfinished, plus the holes for the bolts often gather dirt and water during rides, leading to ingress into the bearings following cleaning. So we created some TPU flexible plastic plugs which seal the holes and create a cleaner look for your Cube eBike.   They're simple to install, simply push fit into the hole, and have recessed notches on them to aid removal with a flat head...