How to install the Cube Stereo Hybrid Pivot Plugs
If you have purchased out Pivot Plugs for the Cube Stereo Hybrid, they will come supplied as 6x plugs. Each are designed to fit specific holes in the linkage and frame.
Firstly, each plug is designed such that the notches in the sides face outward as shown in the photo below. This is to ensure they can be removed using a flat head screw driver.
The diagram below explains which of the plugs go in which locations, there are:
- 2x angled plugs with a single notch - For left/right linkage-shock bolt holes
- 1x small plug (17mm diameter, open on one side) - For left side pivot bolt hole
- 1x large plug (26mm diameter, open on one side) - For right side pivot bolt hole
- 2x solid plugs (16mm diameter, solid on both sides) - For left/right frame motor mount bolt holes