Instructions RSS

Our custom Kiox frame mounting bracket is very simple to install. You can order yours here: https://ebikeprints.com/products/bosch-kiox-frame-mount-for-cube-stereo Before you use our mount we strongly recommend the following: Check there is enough slack in the controller cable to avoid damaging it when the bars are turned Check if the bars will clash with the Kiox when the bars are turned Using a lanyard with your Kiox as a backup should the adhesive mount fail We recommend that you follow this installation guide to get the best fit from our part. 1. Disassemble the original Kiox mount bracket Use an allen key and...

Read more

Instructions -

If you have purchased out Pivot Plugs for the Cube Stereo Hybrid, they will come supplied as 6x plugs. Each are designed to fit specific holes in the linkage and frame.  Firstly, each plug is designed such that the notches in the sides face outward as shown in the photo below. This is to ensure they can be removed using a flat head screw driver. The diagram below explains which of the plugs go in which locations, there are: 2x angled plugs with a single notch - For left/right linkage-shock bolt holes 1x small plug (17mm diameter, open on one...

Read more